Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Whitman
Chimney repair in Whitman typically costs between $350 for minor mortar repointing and $3,200 for partial rebuilding of a deteriorated stack, with most crown and flashing repairs falling in the $650-$1,400 range. We complete most jobs in a single visit, and every repair starts with a Level-2 camera inspection so you see the damage yourself before we touch a trowel.
We’ve been answering calls with a live person, 24 hours a day, for over 42 years. Dispatch and scheduling are coordinated from our Boston office, and our crews serve Whitman directly - from the worker cottages along Washington Street to the capes near the old center and the colonials up toward Temple Street. We know the chimneys here because we’ve worked on them for decades: thick masonry stacks built for coal, converted to oil, now burning wood or pellets, with original clay tile liners that weren’t designed for any of it. If your chimney is showing cracks, leaks, or draft problems, call (774) 310-4281 for a free estimate.
Why Hearthstone Chimney Co. Is Whitman’s Preferred Chimney Repair Company
Our reputation in Whitman was built one repair at a time - not through advertising, but through homeowners telling their neighbors that we showed up when we said we would, explained what was actually wrong, and charged what we quoted. We back every job with the 90-Day Done Right Promise in writing: if it’s not right, we come back, no arguing, no paperwork.
Calls are answered by a live person every hour of every day - not a voicemail queue, not an app. Our technicians are background-checked, uniformed, and carry professional-grade materials from Olympia Chimney, Famco, and DuraFlex so most repairs are completed in a single visit without waiting on parts. No-hassle upfront pricing means the number on your estimate is the number on your invoice.
We understand Whitman’s housing stock in a way that matters for your chimney. The worker-era bungalows, capes, and two-story colonials built during the shoe-manufacturing boom from roughly 1890 to 1950 have chimneys that have cycled through three fuel types. That history creates specific failure patterns we’ve seen hundreds of times. We document every inspection with photos you can see and a plain-English verdict - documented like an engineer, explained like a craftsman.
Our Chimney Repair Services in Whitman
Mortar Repointing
In Whitman’s older neighborhoods, mortar joints between bricks are often the first thing to fail after a hard Plymouth County winter. Repeated freeze-thaw cycles following nor’easters open hairline cracks that let water penetrate, then expand, then crack further. On a pre-1950 stack near Whitman’s old center, we opened a single masonry chase serving both an oil-fired boiler flue and a fireplace and found a cracked chimney crown, lifted flashing, and spalling brick around the firebox. We repointed the crown and mortar joints with a flexible sealant rated for thermal movement, reset the flashing with stainless counterflashing and new step flashing, and installed a stainless DuraFlex flue liner for the wood side. The homeowner said the winter draft and smoke smell in the upstairs bedroom stopped immediately. On the same visit we found first-degree creosote in the fireplace flue that brushed out cleanly and prevented a follow-up relining estimate.
Repointing in Whitman typically runs $450-$1,200 depending on how many courses need work and whether scaffolding is required for a two-story colonial.

Spalling Brick Repair
Spalling - where the face of the brick flakes or crumbles - is common on Whitman chimneys that have gone too long without crown or cap protection. Water gets in, freezes, and pushes off the brick surface. We remove damaged bricks and replace them with matching masonry, then seal the crown to stop the cycle. Most spalling repairs in Whitman fall between $650-$1,800.

Chimney Waterproofing
Because Whitman’s old center-of-town streets are inland enough to avoid South Shore salt-air corrosion but still get Plymouth County nor’easters, the first thing that fails on a worker-era chimney here is usually the crown mortar and flashing, not the cap itself. That means pre-1950 stacks in Whitman often need repointing and crown repair before they need a new cap. Our waterproofing addresses this directly: we apply a vapor-permeable sealant to the masonry that lets moisture escape while blocking new water entry, and we rebuild or seal the crown with flexible, UV-stable material. Waterproofing a typical Whitman chimney runs $350-$850.

Flashing Repair
Flashing failures where the chimney meets the roof are one of the most common calls we get from Whitman capes and bungalows. Older step flashing corrodes, caulking dries and cracks, and water tracks down into the smoke chamber or drips into the firebox. We remove the old flashing, inspect the deck and sheathing for rot, and install new stainless counterflashing and step flashing that outlasts galvanized by decades. Typical flashing repair in Whitman: $550-$1,100.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Whitman
We stock parts and materials from professional-grade brands that we trust on our own homes: Olympia Chimney for caps and liners, Famco for dampers and termination fittings, and DuraFlex for stainless flue liners that handle the thermal stress of wood and pellet conversions. For Whitman customers, this means no waiting on special orders for most repairs. Our technicians arrive with the right materials to complete the job in one visit, and we never substitute builder-grade products to save a few dollars. The components we install are rated for the actual conditions they’ll face - freeze-thaw cycles, acid condensation from modern appliances, and the draft demands of properly sized flues.
Common Chimney Repair Problems We See in Whitman Homes
- Crown mortar and brick spalling from freeze-thaw damage. Whitman’s pre-1950 masonry chimneys absorb moisture during nor’easters, then the repeated freeze-thaw cycles of a Plymouth County winter crack the crown mortar and spall brick faces. This is especially severe on unlined or clay-tile-lined stacks that were built for coal and later converted to oil.
- Flashing failures at the roofline. On older Whitman capes and worker cottages, corroded or improperly installed flashing lets water track down into the smoke chamber or drip directly into the firebox. Homeowners often mistake this for a roof leak.
- Clay tile flue liner cracking and improper sizing. When a pellet or wood stove insert is added to an oversized coal-era flue, the mismatch creates poor draft and CO backdraft risk. In Whitman’s dual-flue-in-one-chase configurations, this can draw exhaust from the boiler into the living space.
- Water intrusion through deteriorated mortar joints. Open joints on the windward side of the stack funnel water into the chase, saturating insulation, rotting framing, and rusting firebox components - damage that often goes unseen until a camera inspection reveals it.
Pricing for Chimney Repair in Whitman, MA
Here’s what chimney repair costs in Whitman’s market:
| Repair Type | Typical Range in Whitman |
|---|---|
| Mortar repointing (partial) | $450 - $1,200 |
| Crown repair or rebuild | $650 - $1,400 |
| Flashing repair (chimney to roof) | $550 - $1,100 |
| Spalling brick replacement | $650 - $1,800 |
| Chimney waterproofing | $350 - $850 |
| Partial chimney rebuilding (above roofline) | $2,200 - $3,200 |
| Stainless flue liner (DuraFlex) | $1,800 - $3,500 |
What moves the price: accessibility (steep roof, height, need for scaffolding), extent of hidden water damage to sheathing or framing, and whether the flue requires relining in addition to exterior masonry work. We give you a single, upfront number before we start - no add-ons, no surprises. Every estimate includes the Level-2 camera inspection and photo report. Call (774) 310-4281 for your free estimate.
We Also Serve Cities Near Whitman
Our Chimney Repair crews work throughout Plymouth County and the surrounding towns, including Whitman, East Bridgewater, Brockton, West Bridgewater, and Halifax. The same live-answer phone, same upfront pricing, same 90-Day Done Right Promise applies wherever we go.
Serving Whitman, MA - Our Local Coverage Area
We’re based in the Whitman area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Chimney Repair in Whitman
Your pre-1950 masonry chimney was built with softer mortar and has endured 70 to 130 years of Plymouth County freeze-thaw cycles, plus fuel conversions that changed the temperature and chemistry inside the flue. Newer chimneys use harder mortar mixes and were designed for modern appliances from the start. Repointing in Whitman typically runs $450-$1,200. Call (774) 310-4281 for an exact quote - estimates are free.
It can be. In Whitman’s worker-era homes, a single masonry chase serving both an oil-fired boiler flue and a fireplace opening creates cross-draft and CO backdraft risks that are only discovered when the flue is opened for inspection. We’ve found improper sizing, cracked clay tile, and even missing dividers that let exhaust migrate between flues. A Level-2 camera inspection reveals whether relining or separation is needed. Call (774) 310-4281 to schedule.
Yes - and in Whitman, the reason is often the chimney’s exterior, not how often you burn. Plymouth County nor’easters deliver heavy wet snow and wind-driven moisture that crack crowns and open mortar joints regardless of use. An annual inspection catches water damage before it requires rebuilding. The $89 Seasonal Tune-Up includes inspection and basic cleaning. Call (774) 310-4281 to book.
Galvanized steel caps rust through in 5-8 years in New England’s wet climate; stainless steel caps last 15-25 years with no corrosion. Because Whitman is inland enough to avoid salt-air acceleration but still gets severe moisture exposure, stainless is the practical choice. We install Olympia Chimney and Famco stainless caps that match your flue size precisely. Caps typically run $250-$550 installed. Call (774) 310-4281 for sizing and pricing.
Look for new cracks in the crown mortar, displaced or missing flashing, and brick debris on the roof or ground - but do not climb onto the roof yourself. The safest check is a professional inspection, since freeze-thaw damage often hides inside the chase where you cannot see it. We offer post-storm inspections with photo documentation so you know exactly what the winter did. Call (774) 310-4281 to schedule - estimates are free.
Written by Russell Haines, Owner at Hearthstone Chimney Co., serving Whitman and local communities since 1984.





Before
After
Before
After
Before
After