Gelco Chimney Cap & Crown Nationwide

Gelco Chimney Cap & Crown in Taunton: What to Know First

We provide independent Gelco chimney cap and crown service in Taunton, with most Gelco cap replacements and crown repairs completed in a single visit and priced upfront before any work begins. A standard Gelco cap installation runs $340-$620 in this market; crown coating or repair typically falls between $280-$550 depending on access and condition. We do not quote over the phone for crown work without looking, because a crown that looks cracked from the ground often has deeper water intrusion once you’re on the roof.

Call (774) 310-4281

This page is for Taunton homeowners who already have a Gelco cap or crown and need it repaired, replaced, or inspected by someone who knows the product line. If it’s worth burning wood in, it’s worth knowing the chimney is clear. Call (774) 310-4281 for a free estimate.

How Gelco Products Fail - and How We Fix Them

• Multi-Flue Caps (Model 13×13, 17×17): The mesh on these units can sag after seven to ten years of Taunton’s freeze-thaw cycles, especially on south-facing exposures where snow melt refreezes nightly. We see this regularly in the older neighborhoods near Taunton Green where the flues sit close together and the cap takes the brunt of weather. We replace with Gelco-spec mesh or upgrade to a heavier gauge if the homeowner plans to stay in the house long-term.
• Single-Flue Caps with Leg Kits: The stainless leg brackets on Gelco’s standard single-flue units fatigue at the bend points, particularly on taller chimneys that sway in wind. In Taunton, we get steady gusts off Mount Hope Bay that accelerate this. We replace the leg kit with OEM-grade stainless or switch to a mount-style cap if the flue tile is sound enough to accept it.
• Crown Seal on Gelco-Protected Flues: Homeowners sometimes think the cap protects the crown completely. It doesn’t. Water still tracks down the flue wall and pools at the crown edge, especially when the Gelco cap overhang is undersized for the chimney width. We pull the cap, assess the crown, and reseat with proper overhang geometry. If the crown is beyond coating, we say so plainly.
• Gelco Copperfield-Coated Caps: The factory black coating on economy Gelco lines chalks and fades after four to five years of UV exposure. This is cosmetic, but Taunton homeowners who take pride in their roofline notice. We can refinish with high-temp coating in the original black, or upgrade to bare stainless or copper if the budget allows. We always explain which choice is structural and which is appearance.
• Custom Wind-Directional Caps: The rotating collar on Gelco’s wind-directional series seizes when grease and creosote work into the bearing, common on fireplaces that burn pine or unseasoned wood. The cap still sheds rain, but it no longer vents properly on still days. We disassemble, clean the bearing race, and lubricate with high-temp graphite. If the collar is scored, we source the replacement collar rather than selling a whole new cap.

Our Gelco Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, 24 hours a day. We ask the cap model if you know it, the flue dimensions if you have them, and whether you’ve noticed water, drafts, or animal intrusion.
2. 2
   On-site inspection with camera. Our technician arrives in uniform, verifies the Gelco model and series, and runs a Level-2 camera inspection of the flue interior. You get photos you can see and a plain-English verdict on whether the cap, crown, or both need attention.
3. 3
   Parts decision. If the Gelco part is still in production, we quote OEM. If it’s a discontinued series, we match with quality aftermarket from our multi-brand inventory, DuraFlex or HeatShield where appropriate. We explain the trade-off and let you decide.
4. 4
   Repair or replacement. Most Gelco cap jobs and crown coatings finish in one visit. Crown rebuilds requiring formwork may need a return trip. The price we quote is the price on the invoice.
5. 5
   Post-work test and documentation. We verify draft, check for leaks with a water test on crown work, and photograph the finished installation. You receive a written report and our 90-Day Done Right Promise.
6. 6
   Cleanup and close. We haul away the old cap and debris. No surprises on the bill. Done right, and we stand behind it.

What Gelco Chimney Cap & Crown Costs in Taunton

What moves the price: roof pitch and access, whether the flue tile needs repair before reseating, and whether the crown has deteriorated past coating into structural rebuild territory. We do not recommend work you cannot see for yourself. Call (774) 310-4281 for a free estimate - estimates are free, and the number we give is the number on the invoice.

Why Taunton Homeowners Call Hearthstone Chimney Co. for Gelco Work

We’ve been sweeping and repairing chimneys in Taunton for over 42 years, and we’ve watched Gelco products come and go from the market. That history matters when you’re trying to source a bracket for a discontinued series or determine whether a cap is worth saving.

Our 90-Day Done Right Promise is in writing, with no arguing. Our technicians are background-checked, uniformed, and trained across multiple professional-grade brands - Gelco, DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield - so we’re not guessing when a part doesn’t fit exactly right. Most jobs complete in a single visit. A live person answers the phone every hour of every day. We’ll be there when we say.

FAQs