Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterCopperfield Chimney Cap & Crown in Taunton: What to Know First
We provide independent Copperfield chimney cap and crown service in Taunton, with most jobs completed in a single visit and upfront pricing agreed before we start. A standard Copperfield cap replacement runs $340-$620, crown repair $480-$890, and we back every job with our 90-Day Done Right Promise in writing. This page is for Taunton homeowners who already have a Copperfield cap or crown on their chimney and need it fixed right by someone who knows the product line, not replaced with whatever fits. Call (774) 310-4281 for a free estimate.
How Copperfield Products Fail - and How We Fix Them
- Multi-Flue Caps (Galvanized Series) - Rust-through at the seams. The galvanized multi-flue caps that Copperfield shipped heavily in the 2000s develop seam separation where the coastal moisture in Taunton gets trapped between the lid and the mesh. We see this most on homes near Mill River and the Taunton Green area where the humidity sits longer. We replace with a stainless or copper equivalent, never re-galvanized, and we lap-seal the new joints with high-temp silicone so the same cycle doesn’t repeat.
- Single-Flue Draft King Caps - Mesh collapse from creosote weight. The Draft King line uses a lighter-gauge mesh that works fine until it doesn’t. When creosote cakes the screen through a skipped sweep season, the weight warps the frame and the cap starts whistling or rattling in a southeast wind. We pull the cap, document the mesh deformation with camera photos you can see, and source either an OEM Draft King replacement or a heavier-gauge aftermarket screen if your flue run calls for it.
- Crown Coat (Brushable Sealant) - Alligatoring after freeze-thaw. Copperfield’s brushable crown sealant is a decent product applied correctly, but we’ve found it applied over active cracks or too thin in Taunton’s spring freeze-thaw cycles. The surface cracks into a pattern that looks like alligator hide, and water gets behind it faster than if it were bare concrete. We grind out the failed coating, repair the crown substrate with proper mortar, then reapply only if the crown geometry supports it. Sometimes the honest call is a full crown rebuild instead.
- Chimney Pot Adapters - Galvanized ring corrosion at the flue interface. Copperfield’s pot adapters for decorative chimney pots use a galvanized mounting ring that corrodes where it meets the flue tile. In Taunton’s older colonials, especially the ones Russell Haines mapped out near Winthrop Street, the flue tiles are often irregular sizes from century-old construction. We fabricate a custom stainless adapter or source a Copperfield stainless upgrade rather than forcing a rusted ring back into service.
- Stainless Caps - Fastener galling from dissimilar metals. Even Copperfield’s 304 stainless caps can seize at the mounting screws when a previous installer used galvanized or zinc-plated hardware. We’ve extracted caps on Taunton roofs where the screw heads twisted off entirely. We carry a full extraction kit, replace with stainless fasteners only, and apply nickel anti-seize so the next sweep or repair doesn’t turn into a drilling job.
Our Copperfield Chimney Cap & Crown Process
- 1
Call and schedule. A live person answers, 24 hours a day. We book a window that works for you, not a four-hour guessing game.
- 2
Level-2 camera inspection on arrival. Our technician photographs the cap, crown, and flue interior. You see the photos on a tablet while we explain what we’re looking at in plain English.
- 3
Parts decision. If your Copperfield cap or crown component is available OEM and the price makes sense, we order it. If lead time is long or the OEM part has a known weak point we’ve seen fail twice, we present a quality aftermarket alternative from our DuraFlex, HeatShield, or Gelco inventory and explain the trade-off.
- 4
The repair. Background-checked, uniformed technicians complete most Copperfield cap and crown jobs in a single visit. We don’t leave you with a tarped chimney and a promise to return.
- 5
Post-repair test and documentation. We run a draft test, verify water shedding with a controlled pour, and give you photos of the completed work plus a written report.
- 6
The 90-Day Done Right Promise. If it’s not right, we come back. In writing, no arguing.
What Copperfield Chimney Cap & Crown Costs in Taunton
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Copperfield cap replacement (single flue) | $340-$480 | Flue size, roof pitch, stainless vs. copper |
| Copperfield multi-flue cap replacement | $520-$780 | Chimney dimensions, mesh gauge, chase top integration |
| Crown repair with coating | $480-$720 | Crack extent, accessibility, whether grind-and-seal or rebuild |
| Full crown rebuild | $890-$1,400 | Chimney width, forming complexity, weather hold days |
| Custom adapter or fabrication | $280-$560 | Stainless grade, welding required, odd flue geometry |
Every estimate is free, and the number we give is the number on the invoice. Call (774) 310-4281 for an exact quote on your Copperfield chimney cap or crown in Taunton.
Why Taunton Homeowners Call Hearthstone Chimney Co. for Copperfield Work
We’ve been serving Taunton and nearby communities for over 42 years, and we’ve watched Copperfield evolve from a regional supplier to a national brand. That history matters when you’re deciding whether a 15-year-old galvanized cap is worth saving or whether the stainless upgrade pays for itself in five Taunton winters. Our 90-Day Done Right Promise is backed in writing with no paperwork and no arguing. Calls are answered by a live person, 24 hours a day, 7 days a week. Our technicians are background-checked, uniformed, and trained across multiple professional-grade brands - DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield - so if your Copperfield part is back-ordered or discontinued, we have options that don’t involve leaving you unprotected. Most jobs finish in a single visit. If it’s worth burning wood in, it’s worth knowing the chimney is clear.
FAQs
No. As an independent Copperfield service provider with no manufacturer affiliation, we use warranty-safe installation practices and OEM or equivalent parts. The warranty covers defects in materials, not who turned the wrench. If you have a current Copperfield warranty document, bring it to the appointment and we’ll note any registration requirements.
Most single-flue replacements take 90 minutes to two hours from ladder set to cleanup. Multi-flue caps or jobs requiring chase top modification can run three to four hours. We complete most jobs in a single visit. Call (774) 310-4281 to schedule.
We can usually source the same Copperfield model line or a visually matched aftermarket equivalent. If your cap is discontinued, we’ll show you the closest match before ordering. The goal is function first, but we don’t ignore how it sits on your roofline.
Hairline cracks under 1/16 inch that don’t penetrate to the flue tile can often be ground, sealed, and coated if the crown slope is correct. Wider cracks, spalling, or a flat or reverse-pitched crown need rebuild. We make that call with camera evidence you can see, not a sales pitch. Call (774) 310-4281 for a free inspection.
We stock common Copperfield stainless single-flue caps and standard mesh sizes. Less common galvanized parts, custom adapters, or specialty finishes typically ship within three to five business days. If your chimney is open and weather is coming, we’ll discuss a temporary measure or an in-stock alternative.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Taunton and nearby areas.