Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Before
After
Before
After
Before
AfterOlympia Chimney Fireplace Services in Taunton: What to Know First
We provide independent Olympia Chimney fireplace services in Taunton, with most repairs completed in a single visit and upfront pricing agreed before we start. A standard gas fireplace service on an Olympia unit runs $180-$290; wood-burning fireplace repairs with firebox or damper work typically fall between $320-$650. We’re not here to sell you a full system you don’t need - we’ll show you the camera footage, tell you what we found, and let you decide what to do next.
This page is for Taunton homeowners who already have an Olympia Chimney fireplace, insert, or gas unit and need someone who knows the product line well enough to fix it right without guessing. If that’s you, call us at (774) 310-4281. A live person answers, 24 hours a day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
How Olympia Chimney Products Fail - and How We Fix Them
- Olympia Chimney OD Series factory-built chimney systems - the OD2000 and OD3000 lines show up frequently in Taunton’s 1980s and 1990s colonials, especially the split-levels off Route 44. The inner wall joints can loosen after 15-20 winters of freeze-thaw cycling, which is more aggressive here than the manufacturer originally spec’d for. We find the gap with a Level-2 camera inspection, then reseal with HeatShield cerfractory foam or replace the affected section with DuraFlex liner if the damage has spread. We document before and after so you see exactly what changed.
- Olympia gas fireplace inserts (GFI line) - the GFI-36 and GFI-42 develop pilot assembly failures that present as “works sometimes, then doesn’t.” The root cause is usually a clogged pilot orifice from dust accumulation, compounded by Taunton’s pollen-heavy springs. We clean the orifice, test gas pressure at the manifold, and replace the pilot generator if millivolt output has dropped below 325 mV. We carry the OEM Olympia pilot assemblies, but we’ve also sourced a more durable aftermarket thermopile that outlasts the factory part in our experience.
- Olympia Chimney damper mechanisms in wood-burning units - the cast-iron throat dampers on older Olympia installations seize open or closed due to creosote glazing at the hinge pin. In Taunton, where homeowners often burn green hardwood from local tree services, this happens faster than the manual suggests. We remove the damper plate, machine the pin or replace it with a stainless pivot from Copperfield, and reset the frame so it seats square. If the firebox throat is too deteriorated, we’ll tell you plainly - no point in a perfect damper on a compromised structure.
- Olympia firebox refractory panels - the factory panels in the FP-36 and FP-42 wood-burning fireplaces crack diagonally from thermal shock, usually after a chimney fire the owner didn’t know happened. The cracks don’t always show from the room side. We pull the grate, inspect all six panels with a borescope, and replace with HeatShield factory-matched refractory or full panel replacement from Olympia if the unit is newer and warranty still applies. We check the flue for liner damage while we’re in there - the two problems travel together.
- Olympia Chimney chimney caps and chase covers - the stock galvanized caps on Olympia factory-built chases rust through at the seams in 7-10 years in southeastern Massachusetts coastal air. We’ve replaced dozens on homes near Taunton Green and the Mill River corridor. We fabricate a custom Gelco stainless cap with proper overhang and screen height, or install a Copperfield chase cover with cross-breaks that shed water instead of pooling it. The difference is visible from the street and measurable in how dry your chase stays.
Our Olympia Chimney Fireplace Services Process
- 1
Call and schedule. A live person answers, day or night. We ask the model if you know it, the symptoms, and when you last had service. We book a window and confirm by text.
- 2
Arrival and protection. Our technician arrives in a marked van, uniformed, with shoe covers and drop cloths. We inspect the work area, protect your floors and mantel, and set up the camera rig.
- 3
Level-2 camera inspection and diagnosis. We run a high-resolution camera through the flue or inspect the gas components with manometers and combustion analyzers. You watch the feed in real time. We explain what we see in plain English - no jargon, no theater.
- 4
Parts decision and upfront pricing. If we need parts, we show you OEM versus quality aftermarket options (DuraFlex, HeatShield, Gelco where appropriate) and explain the trade-off in durability and cost. The price we quote is the price on the invoice. No surprises.
- 5
Repair, test, and document. We complete the work, pressure-test gas connections or draw-test wood-burning units, and take after photos. We leave the workspace cleaner than we found it.
- 6
Written guarantee. Every job is covered by our 90-Day Done Right Promise - in writing, no arguing. If something isn’t right, we come back and make it right.
What Olympia Chimney Fireplace Services Costs in Taunton
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Gas fireplace tune-up (Olympia GFI insert) | $180 - $290 | Accessibility of burner assembly; whether pilot needs replacement |
| Damper repair or replacement (Olympia wood unit) | $320 - $550 | Cast iron vs. stainless; throat condition; masonry repair needed |
| Firebox refractory panel replacement | $450 - $850 | Number of panels; OEM vs. HeatShield; flue inspection included |
| Chimney cap/chase cover replacement | $380 - $720 | Stainless vs. copper; chase height; custom fabrication |
| Level-2 camera inspection with written report | $89 - $150 | Number of flues; roof access difficulty |
These are real numbers for Taunton’s market, based on what we’ve charged in the last 18 months on Olympia Chimney systems. The only way to get your exact price is to see the unit. Call (774) 310-4281 for a free estimate - we’ll come out, diagnose, and quote with no obligation.
Why Taunton Homeowners Call Hearthstone Chimney Co. for Olympia Chimney Work
We’ve been sweeping and repairing chimneys in Taunton for over 42 years. Russell Haines has spent the better part of two decades on local roofs, including a long stretch of older colonials near Taunton Green where the chimneys are as varied as the families living in them. He reads a flue the way other people read a room - quietly, thoroughly, and without missing much.
When you hire us for Olympia Chimney service, you get a technician who knows the difference between an OD2000 and an OD3000 without checking the manual. You get photos you can see and a plain-English verdict. You get the 90-Day Done Right Promise in writing - if it’s not right, we make it right, no paperwork, no arguing. And you get a company that also works with DuraFlex, HeatShield, and Gelco, so if an Olympia part is backordered or discontinued, we have a quality path forward that doesn’t leave you waiting.
We’re not the cheapest outfit in town. We’re the one you call when you’ve already been burned by cheap.
FAQs
No - as an independent Olympia Chimney service provider, our repairs do not void manufacturer warranties as long as we use OEM or equivalent-quality parts and follow installation guidelines. We document our work with photos and serial numbers so you have a record if a warranty question ever arises. If your unit is still under warranty, we’ll note that and advise accordingly. Call (774) 310-4281 and we’ll check your status.
Most common Olympia parts - pilot assemblies, refractory panels, damper hardware - arrive in 3-5 business days if we don’t already stock them. For older OD-series chimney sections that Olympia has discontinued, we fabricate equivalent solutions using DuraFlex liner or HeatShield cerfractory foam, often completing the job faster than an OEM order would have allowed. We tell you the timeline upfront before you commit.
Replace only when the firebox or chimney structure is compromised beyond safe repair, or when repair costs exceed 60% of a new unit installed. For most Olympia units under 25 years, repair is the smarter money. We’ll show you the camera footage, explain the fix, and give you both numbers - repair and replacement - so you decide with full information. No pressure either way.
Gas units annually, before the heating season. Wood-burning units should be swept and inspected after every cord of wood burned, or annually minimum - more often if you burn pine or unseasoned hardwood, which is common in Taunton. Creosote builds faster than most owners realize, and an undetected chimney fire can crack refractory and warp liners without you ever knowing it happened. If it’s worth burning wood in, it’s worth knowing the chimney is clear.
Gas units can develop combustion problems that produce carbon monoxide - odorless, invisible, and dangerous. Wood-burning units accumulate creosote, which ignites at 451 degrees and can crack your firebox or damage the liner. In Taunton’s older homes, many with original Olympia installations, we’ve found advanced deterioration that the owner attributed to “just needing a cleaning.” The real cost of skipping service is never the sweep you didn’t buy - it’s the rebuild you didn’t prevent. Call (774) 310-4281 for a free estimate and camera inspection.
Written by Russell Haines, Owner, Hearthstone Chimney Co. at Hearthstone Chimney Co., serving Taunton and nearby areas.